What happens to the payment when your technician is standing with the customer and something does not go to plan? This page is a checklist to walk through with your own team, one question at a time. It covers a reader that cannot connect, a card typed in at the customer’s location instead of tapped, a bill sent after the technician leaves, several technicians who each need a way to take payment, a dispute on a job done at the customer’s location, and what to count each month. It ends with one small made-up week, priced on Square’s own fees page and on Square alone, so you can see the method in arithmetic. To find the cheapest setup, find which price line each of your own payments lands on. We sell interchange pass-through pricing, so we are not neutral.
What does each technician carry, and what happens when it cannot connect?
Start with the equipment. Get your team in one room, or on one call, and ask each technician to show you exactly what they use to take a payment today. Write down the answer for every person, not for the business as a whole.
- Which phone, tablet or card reader does this technician carry, and who owns it?
- What did it cost to buy, and what would it cost to replace if it is dropped, lost or left in a vehicle?
- If a technician leaves, how fast can that device be shut off from taking payments?
- Does each technician sign in as themselves, or does the whole team share one sign-in?
- Can the office see every payment by technician and by job, or only a total for the day?
- Does adding one more technician add a monthly charge, an equipment charge or neither?
Put those same questions to every processor you are considering, and ask for the answers in writing. Note any question a processor will not answer in writing.
Next, what does the technician do when the reader cannot connect? Ask your team to describe what happened the last time it did. Then ask the processor three things.
- Can a payment be started on the device and finished later, or does it simply fail?
- If it fails, what is the technician supposed to do next, and who decided that?
- Does the fallback land on a different price line than the tap, dip or swipe the technician first tried?
Ask which price line a typed-in card lands on and which line a link lands on, then find out which fallback your team reaches for.
Finish this part with a one-line written rule that a technician can follow with a customer watching. Write a rule that names the first fallback, names the second one, and names who to call if both fail. Test it. Take a device off its connection, run a small real payment that you refund afterward, and ask the processor how a refund affects the fee you already paid. Test it in the office before a job.
See NPS’s page: “Mobile Payment Processing for Small Businesses“.
What happens when a card is typed in instead of tapped?
If a technician types in card details, ask which line covers that payment. Square’s fees page, as read on November 13, 2026, lists four lines. Tap, dip or swipe is 2.6% + 15 cents. Online or invoices is 3.3% + 30 cents. Online API is 2.9% + 30 cents. Manual entry or card on file is 3.5% + 15 cents. Prices change, so open Square’s own page for today’s price before you use any figure here.
Square’s Fee Lines
What each payment type costs on Square
- Tap, dip or swipe2.6% + 15¢Tap, dip or swipe
- Online or invoices3.3% + 30¢Online or invoices
- Online API2.9% + 30¢Online API
- Manual entry or card on file3.5% + 15¢Manual entry or card on fileTyped-in card lands here
Square Price Lines
Four Square lines at a glance
| Payment type | Rate | Fixed fee |
|---|---|---|
| Tap, dip or swipe | 2.6% | 15 cents |
| Online or invoices | 3.3% | 30 cents |
| Online API | 2.9% | 30 cents |
| Manual entry or card on file | 3.5% | 15 cents |
We use Square’s line names on this page because they are the names on Square’s fees page. Ask any other processor what it calls the line that covers a typed-in payment.
Walk through these questions with your team and then with each processor.
- When did a technician last type in a card, and why did they do it?
- Which line covers that payment, and is the line written in the agreement?
- Does the monthly statement show typed-in payments apart from tapped ones, so you can count them?
- Who is allowed to type in a card, and does the system record who did it?
- Does the quote list business and commercial cards separately, since they can cost more?
- If a payment is typed in and then needs a refund, what happens to the fee?
Start with the count. Pull the last month and count the typed-in payments. If the count is small, ask who typed them in and whether the system recorded it. If the count is large, ask why. Ask whether the reason is a reader that fails at certain locations, a device that was left behind, or a habit. Then ask what fix fits that reason.
Next, ask what a quote for the typed-in line looks like from each processor you are considering. Do not accept a general statement that typed-in payments cost “a little more.” Ask for the percentage and the fixed cents, and put them next to the line you pay today. If a processor quotes an interchange pass-through price, ask how a typed-in payment is priced and where the markup is written. Ask every processor the same question.
See NPS’s page: “The Hidden Credit Card Processing Fees Draining Your Business (How to Stop Them Today)“.
What happens when the bill is sent after the technician leaves?
If a customer says they will pay later, ask whether you would send an invoice or a link and which line it lands on. Square’s fees page, as read on November 13, 2026, lists online or invoices at 3.3% + 30 cents. Also ask whether the money arrives, and how fast.
- Who sends the invoice or link, from which device, and by when?
- Does the customer see your business name, the job description and the amount before they pay?
- Does the processor charge anything for sending an invoice, and what does a paid one cost?
- Can the customer pay by card only, or can you offer a bank payment as well?
- Who follows up on an unpaid invoice, and when does that start?
- Can the technician see that a job has been paid, or does the office have to tell them?
Ask about a bank payment option too. NPS offers ACH, and any processor you are considering can be asked what its bank payment option costs and which invoices it applies to. Ask for the price in writing and do not assume it matches the card price.
Next, count your own jobs. Count how many jobs last month were paid after the technician left. Count how many of those were paid within a week, and how many were still open at the end of the month. Use those two numbers to decide whether to ask about price or about collection first.
Then ask, for each invoiced job, what happened at the customer’s location. Was the card declined, was the customer not ready to pay, or did the technician choose to send a bill? Use the answers to ask whether a rule from the first section could have settled the job on site.
See NPS’s page: “ACH and Credit Card Invoicing Platform for Businesses That Want to Get Paid Faster“.
How does a dispute on a job at the customer’s location get answered?
Before you pick a processor, ask your team what record exists for a job done at someone’s location, and decide in advance what you will keep.
- What do we write down on every job: the time, the address, the work done and who did it?
- Is there a signed work order, a photo, or a message from the customer that shows the job was completed?
- Where are those records stored, and can the office find one in a few minutes?
- Who answers a dispute, and by when does the processor need an answer?
- What does the processor need from us to respond, and can we send it from where we work?
Now the fees. We do not compare the two processors on this page, so this paragraph covers one of them. Stripe’s pricing page, as read on November 13, 2026, lists $15.00 for each dispute received, $15.00 for each dispute you respond to manually (refunded for won disputes) and $15.00 for each dispute appealed (not refunded). One dispute that is received and answered manually is $30 before any refund. Three of them are $90 before any refund. Ask every processor you are considering for its dispute fees in writing, and ask which of them are refunded when you win.
Ask who would find the record, write the response and send it, and by when the processor needs it. Ask how long that takes. If the answer is “the owner, at night,” ask each processor how it would help you send the response.
See NPS’s page: “Secure Payment Processing for Businesses: What Keeps Card Transactions Safe and What You Are Responsible For“.
What should you count each month?
Take one month of statements and do these steps in order.
- Sort every payment into three groups. Group one is tapped, dipped or swiped payments. Group two is payments entered by hand. Group three is payments sent from an invoice or link.
- Count the payments and the dollars in each group.
- Add up the fees for each group, using the processor’s own published lines.
- Divide the total fees you paid in the month by the total dollars processed in the same month.
- Count the disputes, the refunds and the invoices still unpaid at month end.
- Do the same for the next month and see which group changed.
Monthly Count Method
How to count what you pay each month
-
Sort every payment into three groupsGroup one is tapped, dipped or swiped payments.
-
Count the payments and the dollars in each groupCount the payments and the dollars in each group.
-
Add up the fees for each groupAdd up the fees for each group, using the processor’s own published lines.
-
Divide total fees by total dollarsDivide the total fees you paid in the month by the total dollars processed in the same month.
-
Count disputes, refunds and unpaid invoicesCount the disputes, the refunds and the invoices still unpaid at month end.
-
Repeat for the next monthDo the same for the next month and see which group changed.
Here is the method on one made-up week for one truck. It is made-up math to show the method, not a promise about your account. The jobs and amounts are invented. The prices are Square’s, as read on its fees page on November 13, 2026, and we do not use Stripe here. We leave Square’s online API line out because no job in the week goes through it. We round each fee to the cent, with half a cent rounding up. All of it is our arithmetic.
- Five jobs tapped, dipped or swiped at 2.6% + 15 cents: $70, $95, $110, $185 and $225. That is $685 and the fees are $1.97, $2.62, $3.01, $4.96 and $6.00, which add to $18.56 (2.71%).
- Two jobs entered by hand at 3.5% + 15 cents: $130 and $260. That is $390 and the fees are $4.70 and $9.25, which add to $13.95 (3.58%).
- Two jobs paid from an invoice at 3.3% + 30 cents: $200 and $410. That is $610 and the fees are $6.90 and $13.83, which add to $20.73 (3.40%).
The week is nine jobs, $1,685 processed and $53.24 in fees. Divide $53.24 by $1,685 and the answer is 3.16%. Each group is priced on its own Square line, so do not read the three percentages as a ranking of the lines. Use the count to see where the fees came from and which group to ask about. If two of nine jobs were entered by hand, ask why. If two were invoiced, ask whether they could have been settled on site.
Take your own sorted month to each processor and ask for a written quote on each group. NPS’s 2026 pricing study is a cost model built from published rate schedules, not a survey, and it found interchange pass-through costs 19% to 31% less than flat rate for online and invoice sales across average tickets from $15 to $2,500, so test it on your own statement because we sell pass-through and are not neutral.
See NPS’s page: “The Merchant’s Guide to What You Really Pay for Card Processing“.
Bottom line
To find the cheapest card processing for payments taken on site, look for the setup with the lowest total on your own numbers. Walk through these with your team first: what each technician carries, what happens when it cannot connect, what happens when a card is typed in, what happens when a bill is sent later, how a dispute gets answered, and what you count each month. Then sort one month into tapped, entered by hand and invoiced payments, ask every processor the same questions in writing, and compare the totals for the whole month.
You can also run your own numbers through our savings calculator.
Who wrote this, and where NPS fits
Nationwide Payment Systems (NPS) publishes this guide. We are a payments company based in Fort Lauderdale, Florida, in business since 2001, and we sell merchant accounts and invoicing software, so we are not neutral. We offer interchange pass-through pricing, ACH, a payment gateway and Smart Invoicing, and we also offer flat-rate options. We do not publish a price list. The study we cite was written by our CEO. NPS offers a free statement review. Browse more in our payments guides.
Frequently asked questions
What is the cheapest card processing for a locksmith or towing service taking payments on site?
To find the cheapest setup, look for the lowest total on your own numbers. Sort one month into tapped, dipped or swiped payments, payments entered by hand and payments sent from an invoice or link, then ask each processor for a written price on each group. We cannot name one processor without your numbers.
What should a technician do when the card reader cannot connect?
Decide it before the job and write it down as one line the technician can follow. Ask your processor whether a payment can be started on the device and finished later, what the fallback is if it fails, and which price line the fallback lands on. Then test the rule once in the office.
Does it cost more when a technician types in the card details?
Yes, on Square’s fees page as read on November 13, 2026. It lists 3.5% + 15 cents for manual entry or card on file and 2.6% + 15 cents for tap, dip or swipe. In our made-up week, the two hand-entered jobs came to $390 and $13.95 in fees. Ask any processor which line covers a typed-in payment.
How do I find my effective rate on payments taken on site?
Divide the total fees you paid in a month by the total dollars processed in the same month. In our made-up week of nine jobs, the fees are $53.24 on $1,685, which is 3.16%. Sort the month into the three groups first so you can see where the fees came from.
What does a payment dispute cost on Stripe?
Stripe’s pricing page, as read on November 13, 2026, lists $15.00 for each dispute received, $15.00 for each dispute you respond to manually (refunded for won disputes) and $15.00 for each dispute appealed (not refunded). One dispute that is received and answered manually is $30 before any refund, and three are $90. Ask any processor you are considering for its dispute fees in writing.
What should I ask a processor when several technicians take payments?
Ask what each device costs to buy and to replace, how fast a lost device can be shut off, whether each technician signs in separately, whether the statement shows payments by technician and by job, and whether adding a technician adds a monthly or equipment charge. Ask for every answer in writing.
Does NPS offer a statement review?
Yes. NPS offers a free statement review.





