Switching processors pays for itself in the month when the money you have saved so far matches the one-time costs of switching. To find that month, divide your total one-time costs by your monthly saving. You can fill in both numbers only from your own records, so this page is a worksheet. Step 1 lists the inputs: three numbers per month from your records, one number per month from a written quote, and one total for the one-time costs. The monthly saving is the difference between two of those numbers, so you work it out and do not collect it. The rest of the page turns the costs of leaving and joining into questions for the processors, does the division, and then tests the answer against a slow month and against a price that steps up. Every dollar figure in the worked steps is made up to show the method. None of it is a promise, and none of it is a price from any real processor. The only figures here that are not made up come from NPS’s 2026 pricing study, and they are labeled as the study’s where they appear.

Break-Even Worksheet

Five steps to find your break-even month

  1. Collect the inputsFor each of your last three months, write down total dollars processed, number of payments, total fees paid, and quote fees.
  2. Work out the monthly savingThe saving for a month is the total fees paid minus the quote fees; work it out, do not collect it.
  3. Split the saving into its piecesSplit any real quote into the percentage piece, the cents piece, and the fee piece, so you can see which piece carries the saving and which takes some back.
  4. Divide one-time costs by the savingAdd every dollar amount into one total, X.
  5. Test on a slow month and a price step-upDivide X by the saving for each of your three months; also rerun the saving with any new price that takes effect during the term.

Step 1: Collect the inputs the break-even needs

Use your last three months, so you can see whether the saving holds from one month to the next. For each month, write down these four numbers:

  1. Total dollars processed: the card sales that month.
  2. Number of payments: how many separate card payments made up those dollars.
  3. Total fees paid: every fee your processor charged you that month. If you cannot find the total, or you are unsure whether a charge belongs in it, ask your processor in writing for the month’s total and for a label on each charge.
  4. Quote fees: what a written quote would have charged on the same dollars and the same number of payments. Ask the processor to price each month line by line, and ask for the monthly total, not only the rate.

Then write one number for the whole worksheet: X, the total of your one-time costs. Step 4 builds it from questions. The saving for a month is the total fees paid minus the quote fees, so step 2 works it out and you do not collect it. Mark the month with the most dollars and the month with the fewest, because step 5 leans on the smallest one.

Both sides use the same dollars and the same payments, so the comparison is like for like. Leave a charge out of the total fees paid and your current setup looks cheaper on paper than it is. Count one twice and the quote looks better on paper than it is. The division in step 4 also assumes that each month’s saving repeats every month, and step 5 tests that assumption.

If a quote is interchange pass-through plus a markup, ask for an estimate of the monthly total and ask what the markup applies to. Interchange varies by card type, and business and commercial cards can cost more. Level 2 and Level 3 data can lower interchange, so ask whether a quote assumes any of it. Ask how the quote treats debit cards.

See NPS’s page: “How to Read Your Merchant Statement and understand how much you are paying!“.

Step 2: A made-up saving, month by month

The current setup is invented: 2.7% of each payment plus 15 cents per payment plus a $20 monthly fee. The quote is invented too: 2.3% of each payment plus 10 cents per payment plus a $30 monthly fee. Neither is a price from any real processor, and neither is an NPS price. Each month’s fees are the percentage part plus the cents part plus the monthly fee.

  • Month 1: $40,000 in 500 payments. Current: $1,080.00 plus $75.00 plus $20.00 equals $1,175.00. Quote: $920.00 plus $50.00 plus $30.00 equals $1,000.00. The saving is $175.00.
  • Month 2: $48,000 in 600 payments. Current: $1,296.00 plus $90.00 plus $20.00 equals $1,406.00. Quote: $1,104.00 plus $60.00 plus $30.00 equals $1,194.00. The saving is $212.00.
  • Month 3: $32,000 in 400 payments. Current: $864.00 plus $60.00 plus $20.00 equals $944.00. Quote: $736.00 plus $40.00 plus $30.00 equals $806.00. The saving is $138.00.

Over the three months the current fees come to $3,525.00 and the quote’s fees come to $3,000.00. The difference is $525.00, which is $175.00 in the average month. The average month is $40,000 in 500 payments, the same as month 1, so $175.00 is the saving to carry into step 4.

See NPS’s page: “Why Your Effective Processing Rate Is Higher Than the Rate You Were Quoted, and How to Find the Gap“.

Step 3: Split the saving into its pieces

In the average month, the lower percentage is worth 0.4% of $40,000, which is $160.00. The lower cents are worth 5 cents on 500 payments, which is $25.00. The higher monthly fee takes back $10.00. So the saving is $160.00 plus $25.00 minus $10.00, which is $175.00. In this invented quote the percentage piece moves with the dollars, the cents piece moves with the number of payments, and the fee piece is the same in every month. That is why the three months above do not save the same amount. Split any real quote into the same three pieces, so you can see which piece carries the saving and which piece takes some of it back. Compare monthly totals and not headline rates.

See NPS’s page: “The Best Payment Processor for Your Business: How to Compare Rates, Contracts and Support“.

Step 4: One-time costs as questions, then the months to break even

The saving only counts after you subtract what it costs to get it. We do not state what any processor charges to leave or to join, and no price on this page is one. Put these questions to each processor and ask for the answers in writing. For each answer, write a dollar amount in your worksheet, even if the amount is zero. Keep each written answer with its date, so you can see which total goes with which closing date.

Questions for your current processor:

  • What is the total in dollars I would owe if I close on a date I choose, and which date does that total assume?
  • What is the last date to give notice, and how do I give it in writing?
  • Would the total change if I closed one month later?

Questions for the processor you might join:

  • What is the total in dollars to start, with every setup or equipment line listed?
  • What would I owe to leave, in dollars, on the same terms?

Before You Switch

Questions to ask each processor in writing

  • Ask current processor: total dollars owed if you close on a date you choose, and which date that total assumes
  • Ask current processor: the last date to give notice, and how to give it in writing
  • Ask current processor: whether the total changes if you close one month later
  • Ask new processor: total to start, with every setup or equipment line listed
  • Ask new processor: what you would owe to leave, in dollars, on the same terms
  • Ask new processor: on what date any price in the quote changes and what the new price is

Then add your own costs. If you would replace any equipment, update how you take payments, or run two systems side by side for any days, put a dollar figure on each one. If a contract term is unclear, ask the processor to explain it in writing before you sign.

Add every dollar amount into one total. Call it X. Then:

Months to break even = X divided by the monthly saving.

Here is made-up math with the $175.00 saving. Suppose the invented answers are $450 from the current processor, $225 from the new processor and $200 of your own costs. X is $450 plus $225 plus $200, which is $875. Three invented totals for X show the method:

  • An invented X of $350: $350 divided by $175 is 2.0 months.
  • An invented X of $875, the total above: $875 divided by $175 is 5.0 months.
  • An invented X of $1,400: $1,400 divided by $175 is 8.0 months.

Invented Examples

How one-time costs change your break-even month

One-time costs (invented X) Monthly saving (invented) Months to break even
$350 $175.00 2.0 months
$875 $175.00 5.0 months
$1,400 $175.00 8.0 months
Made-up math to show the method, not a promise about your account.

You can also run the division backward. Before you look at a quote, decide the longest wait you would accept, in months. Your most one-time cost is then that number of months times the monthly saving. With a six-month limit and the $175.00 saving, the most X can be is 6 times $175.00, which is $1,050.00. With the same limit and the $138.00 saving from the smallest month, it is 6 times $138.00, which is $828.00. The invented $875 fits the first limit and not the second, which is the same finding step 5 reaches from the other direction.

Take the $875 case. If the $175.00 saving held for twelve months, the saving would be $2,100.00, and after the invented $875 the first year would be ahead by $1,225.00. If the monthly saving is zero or less, there is no break-even month.

The question about closing one month later matters because waiting has a price too. Suppose the invented current-processor answer drops from $450 to $150 if you close one month later, so X becomes $575 instead of $875. Compare both choices after the same twelve months from today. Switching now: twelve months of $175.00 is $2,100.00, and after $875 you are ahead by $1,225.00. Switching one month later: eleven months of $175.00 is $1,925.00, and after $575 you are ahead by $1,350.00. In this invented case, waiting one month finishes ahead by $125.00. Compare dates the same way with your own written answers.

Timing Decision

Switching now vs. waiting one month

One-time costs (invented)
Switch now$875
Switch one month later$575
Months of saving in year one
Switch nowTwelve months at $175.00 = $2,100.00
Switch one month laterEleven months at $175.00 = $1,925.00
First year ahead by (invented)
Switch now$1,225.00
Switch one month later$1,350.00

In this invented case, waiting one month finishes ahead by $125.00.

See NPS’s page: “4 Merchant Account Pricing Models: Interchange Plus, Flat Rate, Tiered and Membership“.

Step 5: Test the answer on a slow month and on a price that steps up

The division uses one saving, so choose it on purpose. Divide X by the saving for each of your three months and write all three. In the made-up example the saving was $212.00, $175.00 and $138.00, so the invented $875 breaks even in 4.1, 5.0 and 6.3 months.

A slower month can go lower. In a made-up month of $14,000 in 175 payments, the current setup costs $378.00 plus $26.25 plus $20.00, which is $424.25. The quote costs $322.00 plus $17.50 plus $30.00, which is $369.50. The saving is $54.75. The percentage piece and the cents piece shrink with the month, to $56.00 plus $8.75, which is $64.75. The $10 fee difference does not shrink. At $54.75 a month, $875 divided by $54.75 is 16.0 months. Use the slowest month you have records for, and decide whether you can accept that wait. If your slowest month is smaller than any of the three, ask the processor to price that month too.

The second test is a price that steps up. Ask on what date any price in the quote changes and what the new price is, in writing. Suppose the invented quote moves after six months to 2.6% plus 10 cents with the same $30 monthly fee. In the average month of $40,000 and 500 payments, the quote then costs $1,040.00 plus $50.00 plus $30.00, which is $1,120.00, against $1,175.00 for the current setup. The saving drops from $175.00 to $55.00. The first five months add up to $875.00, so the invented $875 is covered in month 5, before the change. The first year is different. Six months at $175.00 plus six months at $55.00 is $1,380.00, and after the invented $875 the year is ahead by $505.00 instead of $1,225.00. Also ask whether the processor can change any fee during the term, and ask for the answer in writing.

Our study, “The Flat-Rate Tax” (2026 Edition) by Allen Kopelman, CEO of NPS, is a cost model built from published rate schedules, not a survey. Interchange pass-through costs 19% to 31% less than flat rate in the model, for online and invoice sales across average tickets of $15 to $2,500. In the model, a business with $50,000 a month in invoices at a $150 average ticket keeps about $6,100 a year. Those are the study’s figures, not made-up ones, and they are not a result for your account. The same study says flat rate can still win for very small tickets, around $15 and under in person, and for brand-new businesses with very low volume. We sell pass-through pricing, so test every figure against your own records. You can read it as NPS’s 2026 pricing study.

See NPS’s page: “Merchant Account Cost Calculator: What to Plug In and How to Read the Result“.

See NPS’s page: “Cheapest Payment Processing in 2026: What You Really Pay and How to Compare“.

Write four answers at the bottom of your worksheet: the months to break even on your average month, the months on your slowest month, the months once any price change has taken effect, and the date by which you would have to give notice to your current processor. If the four answers agree that the switch pays back inside the wait you decided on, you have your own numbers to take to the next conversation. If they disagree, plan around the slowest month and the stepped-up price, because those are the cases where the saving is smallest.

Bottom line

Switching pays for itself in the month when your saving so far matches your one-time costs. Pull total dollars, number of payments and total fees for your last three months. Get a written quote priced on those same three months. Collect the one-time costs as written answers to the questions above, divide by the monthly saving, and then rerun the division on your slowest month and on any price that steps up before you sign anything. If your own numbers do not break even in a time you are comfortable with, the worksheet has told you to stay put.

You can also run your own numbers through our savings calculator.

Who wrote this, and where NPS fits

Nationwide Payment Systems (NPS) publishes this guide. We are based in Fort Lauderdale, Florida, in business since 2001, and we sell merchant accounts and invoicing software, so we are not neutral. We offer interchange pass-through pricing, ACH, a payment gateway and Smart Invoicing, and we also offer flat-rate options. We do not publish a price list. The study we cite was written by our CEO. NPS offers a free statement review. Browse more in our payments guides.

Frequently asked questions

When does switching processors pay for itself?

In the month when your monthly savings added up equal your one-time costs. Divide the total of your one-time costs by your monthly saving. This assumes each month’s saving repeats. In our made-up example, an invented $875 of one-time costs divided by an invented $175.00 monthly saving is 5.0 months. That is made-up math to show the method, not a promise about your account.

Which numbers do I need to start the worksheet?

For each of your last three months, write down total dollars processed, the number of payments, total fees paid, and the fees a written quote would charge on those same dollars and payments. Then write one total, X, for your one-time costs. The saving for a month is your total fees paid minus the quote fees.

What one-time costs should I ask about?

Ask your current processor for the total in dollars you would owe if you close on a date you choose, the last date to give notice, and whether the total changes if you close a month later. Ask the new processor for the total to start and what you would owe to leave. Ask for every answer in writing, and add your own costs, such as replacing equipment or running two systems side by side for any days.

What if my monthly saving is different every month?

Run the worksheet on each month and use your slowest month as the test. In the made-up example, the saving was $212.00, $175.00 and $138.00 in the three months, which is 4.1, 5.0 and 6.3 months to break even on an invented $875 of one-time costs. A made-up month of $14,000 in 175 payments saved $54.75, which is 16.0 months.

What if the quote’s price changes after a few months?

Ask in writing on what date any price changes and what the new price is, then rerun the saving with the new price. In the made-up example, a quote that moves after six months saves $55.00 a month instead of $175.00, and the first year ends ahead by $505.00 instead of $1,225.00.

Does NPS offer a statement review?

Yes. NPS offers a free statement review.

Does the study say switching will save me money?

No. The study is a cost model built from published rate schedules, not a survey, and it comes from a processor that sells pass-through pricing. In the model, interchange pass-through costs 19% to 31% less than flat rate for online and invoice sales across average tickets of $15 to $2,500. Your result depends on your own records and your own quote.